The Right Cable
for Every Pedal

Powers up to 5 standard 9V pedals from a single 1 SPOT output. The go-to daisy chain for most pedalboards.

8-way daisy chain for larger boards. Powers up to 8 pedals from a single output.

12-inch extension cable with 5.5×2.1mm plug-and-socket connectors for extending a DC cable

Dual 5.5×2.1mm plugs allow daisy-chaining two pedals from one output or combining current from two outputs to one pedal.

12" (304mm) straight DC cable with standard 5.5×2.1mm barrel connectors. Ideal for tightly spaced boards.

18" (457mm) DC cable for pedals that need a little more reach from the power supply.

22" (559mm) DC cable. Useful for boards with wider pedal spacing or complex cable routing.

26" (660mm) — the longest standard DC cable in the 1 SPOT line. Covers virtually any board layout.

20" (508mm) right-angle to right-angle DC cable. Links the 1 SPOT Pro CS11 to XP5 or XP8 expander units.

Converts 5.5×2.1mm to 5.5×2.5mm barrel plug. Works with Line 6 HX Series and POD Go.

Adapts any 9VDC output to a 3.5mm (1/8") positive-tip jack for pedals that require it.

Allows connection to pedals with a 5.5 x 2.5mm barrel jack (i.e. older Line 6, Digitech and certain Eventide pedals.)

Reverse polarity adapter for Yamaha and certain other pedals that require positive-tip (center-positive) power.

Connects a DC power output directly to a pedal's battery terminals. For pedals with no DC input jack.

Automatically converts 9Vdc to 18Vdc (or 12Vdc to 24Vdc) — no switch needed. Handles up to 100mA.

Converts an 18V output on a 1 SPOT Pro power supply down to 9V. Standard 5.5×2.1mm connectors.

Replacement international 12V/2.5A power cable for the 1 SPOT Pro XP5. World voltage compatible.

Replacement international 12V/4.0A power cable for the 1 SPOT Pro XP8-PS. World voltage compatible.

IEC input/output with a standard US outlet. 18-gauge wire handles up to 1,250W. Keeps your amp cord tidy at the power supply.

Replacement Pedaltrain® mounting brackets for 1 SPOT Pro power supplies. Sold as a set.

Measures current draw of any DC pedal and functions as a cable tester. Essential for diagnosing pedalboard power issues.